How do you hook up sound to a projector

how do you hook up sound to a projector

How to connect a sound system to a projector?

How to connect your sound system to your projector. Turn your amplifier or receiver off to avoid it transmitting the sounds while you are connecting. Place the cable in the audio out port. Insert the ends of the audio cable to the sound system to amplifier the sound they produce. After connecting to the receiver, turn it on.

How can I boost the audio from a projector?

If you would like to use some external speakers or a sound bar to boost the audio the best way is still to go direct from the source. Send the video to the projector then the audio directly to the speakers. Why wouldnt you send audio to the projector then back? The projector is usually quite far away (in cabling terms) on a ceiling mount.

Why is there no audio coming out of my projector?

No Audio But There’s Video: If you connect an HDMI cable to a laptop in order to link it to a projector and there’s no audio coming out, there might be multiple reasons for this problem. First off, your projector might have no built-in speakers.

Do projectors have built in speakers?

A number of modern video projectors connect via HDMI (which supports both audio and video) or through other AV ports plus a 35mm jack for sound purposes. These latest projectors can double as television sets, which are known for their built-in speakers.

Can you connect a projector to a different audio device?

You can have the sound come out from both your projector speaker and through your HDTV that’s connected to a cable box or BD player. At any rate, here are the different ways you can connect your projector to different audio devices.

How do I hook up my soundbar to my projector?

Heres how you should hook them up: 1 With the devices off, connect your HDMI cable into the HDMI/HDMI ARC port on your projector. 2 Plug the other end of the HDMI cable to the HDMI/HDMI ARC port on your soundbar. 3 Turn both devices on. 4 Ensure both devices are set to the HDMI channels that you connected to.

How do I connect my AVR to my projector?

Turn Off, Connect, and Turn On: Turn off both devices first. Plug the audio cables into the sound port or “Audio Out” on your projector. Insert the audio cables’ other connectors into the “Aux-In” port on the rear end of the AVR. Now you can turn on both devices. Press The Source Button: The AVR has a “Source” button.

How does a projector work?

To make this possible, the projector is connected to an amplifier which turns the input signal (usually from a DVD player) into an amplified sound that can be heard over other sounds. The image light will shine through lenses and then through a device called a lens.

Related posts: